GV-Relay V2
The GV-Relay V2 is designed especially for driving higher voltage output devices, and it is controlled by other GV devices, such as GV-Video Server, GV-Compact DVR, GV-IP Camera, GV-DSP LPR, GV-I/O USB Box and GV-NET/IO Card V3.1.
The GV-Relay V2 provides 4 relay outputs, and each output can be set as normally open (NO) or normally closed (NC) independently as per your requirement.
The GV-Relay V2 provides 4 relay outputs, and each output can be set as normally open (NO) or normally closed (NC) independently as per your requirement.
|
Relay Output |
RL1~RL4 |
|
Relay Control Source |
+5V, COM, DO1 - DO4 Connecting Outputs of GV-Video Server / GV-Compact DVR / GV-IP Camera / GV-DSP LPR / GV-I/O USB Box / GV-NET/IO Card V3.1 |
|
Relay Status |
Normally Open and Normally Closed for each output |
|
Relay Capacitance |
10A 250V AC, 10A 125V AC, 5A 100V DC |
|
Relay On Time |
8ms |
|
Relay Off Time |
5ms |
|
Dimensions (W x H x D) |
120 x 26 x 93 mm / 4.72 x 1.02 x 3.66in |
|
Installation Guide |
|
| Note: Specifications are subject to change without notice. | |