GV-EV48
GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.
{tab Техническое характеристики}
| System Requirements | ||
| GV-ASManager Version | GV-ASManager V4.1 or later | |
| Hardware | ||
| CPU | 32-bit ARM7TDMI | |
| Number of User Cards | 40,000 cards | |
| Event Buffer | 1,000,000 events and log data | |
| Power | AC 100~250 V , 50~60Hz | |
| RS-485 Interface | 1 RS-485 interface only for GV-Readers and GV-GF Fingerprint Readers (max. 2 readers) | |
| Communication | TCP/IP | |
| Output | GV-EV48-24 Floors | 24 relay outputs (30VDC, 1A; 125V AC, 0.3A) |
| GV-EV48-48 Floors | 48 relay outputs (30VDC, 1A; 125V AC, 0.3A) | |
| Operating Temperature | 0~65°C / 32 ~ 149°F | |
| Operating Humidity | 10% ~ 90% RH (non-condensing) | |
| Dimensions (W x H x D) | 210 x 170 x 55 mm (8.27 x 6.69 x 2.17 in) | |
| Weight | 610 g (1.34 lb) | |
| Certification | CE, FCC, RoHS | |
{tab Особенности}
- Grant access to specific elevator floors using access cards, card's PIN code or fingerprint
- GV-EV48 – 24 Floors: Built-in 24 relay outputs to support up to 24 elevator floors
- GV-EV48 – 48 Floors: Built-in 48 relay outputs to support up to 48 elevator floors
- Support up to 2 GV-Readers / GV-GF Fingerprint Readers through network connection and RS-485 connection
{tab Документация}
Скачать документацию в PDF (Англ.)
{/tabs}